FDA Draft Guidance Document on UHMWPE
The FDA issued a draft guidance document on the required testing for devices using ultra high molecular weight polyethylene (UHMWPE) in February 2016. The guidance document separates UHMWPE into four categories: (1) conventional UHMWPE; (2) highly crosslinked UHMWPE; (3) Vitamin E stabilized UHMWPE; and (4) other forms of UHMWPE, including porous UHMWPE. In each category, […]
Potential FDA Ban on Powdered Gloves
The FDA recently released a statement proposing a ban on most powdered surgical gloves in the United States. The powder, usually in the form of corn starch, is added to facilitate putting on the gloves and taking them off, as well as providing some comfort. The FDA’s concerns about the powder stems from its use […]
Residual Solvents in Pharmaceuticals
Residual solvents can sometimes be found in pharmaceuticals after processing. These solvents are sometimes used during manufacturing to synthesize, purify or blend the active pharmaceutical ingredient (API) with excipients, or may be used elsewhere in the manufacturing process, from solvents to clean equipment or solvents used in the packaging process. Often, these solvents can be […]
Duck, Deformulated
The ubiquitous bathtub duck, historically referred to as a rubber duck, is actually often made from plasticized polyvinyl chloride. Our scientists measured the composition of commercial bathtub ducks, investigating the base resin with infrared spectroscopy, plasticizers with gas and liquid chromatography, and fillers with energy dispersive spectroscopy. And, because it is important to know if […]
Degradation Products from In Vivo Studies
Multiple degradable thermoplastics are being used for implant or other in vivo use in the medical industry. Polycaprolactone, polylactic acid, poly lactic-co-glycolic acid and polydioxanone are just four examples of polymers that will biodegrade when placed in the body through a hydrolysis reaction. The benefits of these polymers for biomedical applications depend on their degradation […]
Notch Fatigue of Ultrahigh Molecular Weight Polyethylene (UHMWPE) used in Total Joint Replacements
CPG researcher Adam Kozak was a co-author on a recently published article in the Journal of the Mechanical Behavior of Biomedical Materials. Along with co-authors from UC-Berkeley (Ansari, Gludovatz, Ritchie, and Pruitt), these researchers investigated the sensitivity of ultra high molecular weight polyethylene (UHMWPE) to fatigue when stress concentration sites are present in the form […]
Trace Formaldehyde Detection
Formaldehyde, or CH2O, is commonly used in producing resins for coatings and adhesives, automotive materials, as well as materials for the textile industry. In these applications, the formaldehyde is normally incorporated into the material through a chemical reaction, and hence loses its chemical identity. Formaldehyde is also a by-product of some chemical reactions. Aqueous solutions […]
Microbeads in Toothpaste
Ever wonder what those little blue particles are in some toothpastes? One of our scientists did, and started to investigate their effects on teeth brushing. Known as microbeads or microplastics, these blue particles are usually polyethylene or polypropylene. They are commonly included as exfoliants in face cleansers, and may be added to toothpaste for visual […]
Why Polymer Scientists Make Great Cooks
Okay, so my wife may disagree. However, the long chain nature of a lot of food products (i.e. their polymeric nature) allows us to at least understand the physics behind the behavior of food. Cooks have known the secret of thickening sauces and gravies with a fairly small amount of flour or cornstarch. A key […]
Rubber Band-based Air Conditioners?
A common science experiment is to have a student place a rubber band against their lips while rapidly stretching the rubber band. The student will feel the rubber band heat up. Rapidly relaxing the rubber band will result in the band cooling. What is happening is that in an unstretched state, the rubber molecules are […]