Orthopaedics

Kurtz, S.M., Muratoglu, O.K., Buchanan, F., Currier, B., Gsell, R., Greer, K., Gualtieri, G., Johnson, R., Schaffner, S., Sevo, K., Spiegelberg, S.H., Yau, S., Shen, F., “Interlaboratory reproducibility of standard accelerated aging methods for oxidation of UHMWPE,” Biomaterials, 22, 1731-1737 (2001). https://www.ncbi.nlm.nih.gov/pubmed/11396876

Orthopaedics

Kurtz, S.M., Muratoglu, O.K., Gsell, R., Greer, K,. Shen, F.W., Cooper, C., Buchanan, F.J., Spiegelberg, S.H, Yau, S.S., Edidin, A.A., “Interlaboratory validation of oxidation-index measurement,” Journal of Biomed. Mater. Res., 63, 15-23, (2002). https://www.ncbi.nlm.nih.gov/pubmed/11787024

Orthopaedics

Muratoglu, O.K., Ruberti, J., Melotti, S., Spiegelberg, S.H., “Optical analysis of surface changes on early retrievals of highly cross-linked and conventional polyethylene tibial inserts,” J Arthroplasty, 18 (7), 42-47 (2003). https://www.ncbi.nlm.nih.gov/pubmed/14560410

Orthopaedics

Spiegelberg, S.H., “UHMWPE for Total Joint Arthroplasty: Past, present and future,” Bonezone, June 9, 2012. https://www.bonezonepub.com/component/content/article/453-uhmwpe-for-total-joint-arthroplasty-past-present-and-future?limitstart=0

Orthopaedics

Emily G. Heuer, Gavin J. C. Braithwaite, Bayen L. Miller, Stephen H. Spiegelberg, Ray A. Gsell, Alicia S. Rufner and Norman Stark. “Oxidative-induction time as a measure of vitamin E concentration in ultra-high molecular weight polyethylene,” Journal of Biomedical Materials Research Part B: Applied Biomaterials, April 28, 2014. https://onlinelibrary.wiley.com/doi/10.1002/jbm.b.33175/abstract

Orthopaedics

Louis G. Malito; Sofia Arevalo; Adam Kozak; Stephen Spiegelberg; Anuj Bellare; Lisa Pruitt. “Material properties of ultra-high molecular weight polyethylene: Comparison of tension, compression, nanomechanics and microstructure across clinical formulations,” Journal of the Mechanical Behavior of Biomedical Materials, Volume 83, July 2018, 9-19. https://www.sciencedirect.com/science/article/pii/S1751616118304077

Miscellaneous Biomaterials

Berlin, J., Braithwaite, G., Spiegelberg, S.,”Injectable hydrogel-based medical devices: There’s always room for Jell-O,” BONEZONE, Fall, 2010. https://www.bonezonepub.com/component/content/article/247-injectable-hydrogel-based-medical-devices-theres-always-room-for-jell-o1?limitstart=0

Medical Device Cleanliness

Spiegelberg, S., “ASTM Activities for Assessing Cleanliness of Medical Devices,” Proceedings from the Materials & Processes for Medical Devices Conference, p. 125, Sept 8-10, ASM International (2004). https://www.astm.org/DIGITAL_LIBRARY/JOURNALS/JAI/PAGES/JAI13389.htm

Medical Device Cleanliness

Spiegelberg, S., “ASTM Standards for Assessing Cleanliness of Medical Devices,” Journal of ASTM International, in press (2006).

Extensional Rheology

Spiegelberg, S.H., Ables, D.C., and McKinley, G.H., “The Role of End-Effects on Measurements of Extensional Viscosity in Filament Stretching Rheometers,” J. Non-Newtonian Fluid Mech., 64, 229 (1996). https://www.sciencedirect.com/science/article/pii/0377025796014395