A Peek at Peek
On September 25-26, 2013, an international symposium on polyetherether ketone (PEEK) will be held at Drexel University. PEEK is finding increasing use in the biomedical community, particularly in the area of permanent implants. Spinal implants have been composed of PEEK for several years, finding use as stabilization rods, spacers, and articulating surfaces. Characterization of PEEK […]
Fatigue Crack Propagation
Fatigue crack propagation (FCP) analysis is a method to monitor the resistance of a material to crack inception and propagation under cyclical loading. ASTM E647 describes the methodology for measuring crack propagation in materials. An example of the typical data obtained in FCP analysis is shown above for GUR 1020 UHMWPE subjected to ionizing radiation […]
Consolidation Defects in UHMWPE
Ultra high molecular weight polyethylene (UHMWPE) is the most commonly used bearing surface in hip and knee arthroplasties. Due to its high molecular weight, UHMWPE cannot be injection molded or extruded with a screw extruder. Compression molding or ram extrusion are the two consolidation processes used for UHMWPE, whereby the combination of temperature and pressure […]